You can suport my work by donations.

Wednesday, February 2, 2011

How To Reset The Transfer Belt - Bizhub C203 / Bizhub C253 /bizhub C353

How to reset the transfer belt - Bizhub C203 / C253 / C353 even Bizhub  C200.

You will need a 80mA Fuse(50mA, 63 mA it also good). 

If you use a 100mA or higher value, you risk to burn the motherboard of the copier.

Pictures speak for themselves!
   
 








51 comments:

  1. I get an error message c-2451 after doing this. Do you know whats wrong?

    ReplyDelete
  2. C2451: Release new transfer belt unit.

    What is the value of you fuse?

    ReplyDelete
  3. I used a 80ma fuse and it gave me the code. Changed the fuse to 32ma/p fuse and trouble reseted. It worked like a charm. thx!

    ReplyDelete
  4. remove the separator finger before starting this procedure, you avoid to scrap the belt

    ReplyDelete
  5. the error for bizhub c353

    ReplyDelete
  6. muchas gracias este manuel me ayudo mucho
    resulto todo muy bien
    saludos

    ReplyDelete
  7. Thank you so much!

    ReplyDelete
  8. Hey My friends!
    Can anybody send to me the service manual of konica minolta bizhub C200 and bizhub 164/184.
    I will ever thankful to you
    Srimanta

    ReplyDelete
  9. i'm getting the error code c-2451. The only fuse they had was a .75 to replace the .80
    I've tried everything except put another fuse in. It runs and seems like it's going to go then it makes this slight gear stripping noise... pttt. then the error code. This machine also needs all 4 imaging units for about 6 months now and has run flawless without replacing them. Could this be part of it? I've checked all gears and everything including the belt spins fairly freely. Although I did find a long hair tangled in one of the belt shafts... it's all removed now.

    ReplyDelete
  10. i just replaced the .75 fuse with a .50 and same problem

    ReplyDelete
  11. HI
    Iam urgently in need of a service manual for a bizhub C252. Getting error code C-3452 Malfunction detected. Call Tecnical Representative.......
    Could anyone please assist?
    Many thanks!

    ReplyDelete
    Replies
    1. Hi, do you still need the manual, mail me at:
      impressaodigital.poa@hotmail.com and I will send to you
      for free.
      bye

      Delete
    2. Good day. I saw your contact in kmc copyservice blog, I wonder if you can send me the service manual of Konica c200, I'll be very grateful.
      My email: mda@mdacriativa.com.br
      My name is Andrew Vilaça, I'm in Brazi

      Delete
  12. Basically the transfer belt and fuser fuses are a picofuse and GMA series fast blow fuse as stated here on this website you can get them at radio shack. Another cheap source for getting them online is:

    http://www.kopy-kat.com

    They also have infinite drum chip re-setters that are cheap and work great < $100.00

    ReplyDelete
  13. Hi there, I have a Bizhub C300 but it has exactly the same set up as the pictures shown on here. I am trying to reset the Transfer Belt and have replaced it with a 80ma and a 50ma,. but neither have reset it and I get the error code C-2451. Can anyone help please?

    Thanks

    ReplyDelete
    Replies
    1. Hello, I service these machines right here in Brazil and
      I've faced this problem.
      I solved changing the fuse for another one of 32ma.
      Any value higher than this give the code c-2451.
      It's interesting to note that values so low as these
      usually have a high tolerance what make some pieces
      don't work as they should.
      Any trouble mail me at:
      impressaodigital.poa@hotmail.com
      see you

      Delete
    2. The pictures are great! I pulled out the transfer unit and the fuse. It is now Sunday nite so I need to get the fuse replacement tomorrow. I pieced the whole thing back together and closed the door fine. Now I try to open the door and the right hand side is jammed...??

      Delete
  14. dear sir i have develop ineo +203..here appears a problem. actually when i touch the Fax button it doesnt work.. would you please let me know what is the problem with my printer¿

    ReplyDelete
  15. I just found your website and am I glad I did. As an ex Xerox tech paying for supplies that still have life in them always bothered me. I just started servicing my own Bizhub C351 and need a good supplier of supplies. Any suggestions? I also need a service manual. Thanks Ed

    ReplyDelete
  16. Although I am no genious, I fail to see why a fuse rating would affect the ability of the transfer unit working. I cannot see that the electronics would have that sensitive a board to detect the difference in resistance (Absolutely unmeasurable)between a 80milliamp and as much as a full amp fuse.Can anyone explain WHY?

    ReplyDelete
    Replies
    1. The fuse is only used to reset the Transfer Belt counter. It is a way to re-use the belt instead of replacing with a brand new one.

      Delete
  17. I am enjoying very much.

    ReplyDelete
  18. hi i m amanlal dear sir plz help same time

    ReplyDelete
  19. could anyone tell me how to remove the " C " looking washer thing?
    I am having difficulty removing it and i don't want to use much force so i don't break it.

    Thanks
    Mike

    ReplyDelete
  20. Hi guys my c353 won't reset the transfer belt and the fuser unit. a technician said it was the board what to do think can anybody help?

    ReplyDelete
    Replies
    1. ICP5 is blown. replace icp5 with a normal 2,5 amp fuse.

      Delete
    2. Hi Admin, I have 2 PRCB's that need ICP5 replaced what fuse holder do you use and is it a solder on holder or does it use clip. As you can tell havent been down this road before so any help is appreciated. By the way love the blog and will check it out daily.

      Delete
  21. what is error c-4551 in a c203 bizhub

    ReplyDelete
    Replies
    1. c-4551 Laser Malfunction C you need replace laser cyan but Konica recommended replace all four laser.

      Delete
  22. Good day. I saw your contact in kmc copyservice blog, I wonder if you can send me the service manual of Konica c200, I'll be very grateful.
    My email: mda@mdacriativa.com.br
    My name is Andrew Vilaça, I'm in Brazi

    ReplyDelete
    Replies
    1. Maybe I can help you but this service have 52 mega

      Delete
  23. I am enjoying very much the discussions of technical and other persons questions, answers and their interest on Konica Minolta machines.
    With this reference I think in color machines Konica Minolta machines are best???

    S.M. Dutta,
    Assam, India

    ReplyDelete
  24. I made the switch excellent and worked perfectly, thanks

    ReplyDelete
  25. I tryed with a 31.5; 40 dnd 63ma fuses and it gave me the error code c-2451.

    ReplyDelete
  26. dear sir

    how to reset imaging unit model c-253

    ReplyDelete
  27. i have konica c351.i replace the fuse form image belt and i got error c2451.
    after a while and some reset i got error c 5356. can sombody help me?.

    ReplyDelete
  28. i changed 0.08amp with 0.05amp. works fine. thnaks

    ReplyDelete
  29. The pictures are very illustrative and clear to understand.I appreciate your balanced advice.Thanks!!!
    Konica Minolta Bizhub 600 Toner Cartridge

    ReplyDelete
  30. hy a use all this step, i have a bizhub c300 end after change end put on the place unit transfer say again "please change the transfer unit" end eror is c2152 can you help me some information here or email florin_purea@yahoo.com
    thx

    ReplyDelete
  31. Thanks so much. Thanks to the tip I changed out the transfer unit and saved $300. It came with an ozone filter though and I can't figure out where it goes. Its a bizhub C203

    ReplyDelete
  32. Hi, I'm trying to buy a new fuse for the bizhub c253 image transfer belt but I don't know what kind of fuse to get. When I tried to order it online they said I needed the amp amount, the size, and if it was "fast" or "slow". Can someone please help me out.

    ReplyDelete
  33. Dear sir, I have kmb c550 and is given me error code:P21 and P6,what is the problem and if i print it clear at the top but when it get to the middle it will fade. also is there any reset er chips for transfer belt and fuser unit and i also need service manual for this machine that also containing all the error code,i will be happy if any body can send me free service manual to my email : archybos@yahoo.co.uk

    ReplyDelete
  34. Hello sir i need service manual of bizhub c452 and bizhub c353. Please if you have send me at ( muzammila90@yahoo.com). I shell be will thankfull to and pray for you may God bless you and gave u all pleasures in your life.

    ReplyDelete
  35. I have a C253 and I did it with a 35mah 250V fuse worked like a charm but I did try it with a 80 and got the C2451 also until I went with a 35mah fuse. Thanks this saves me a bundle. Ronnie Mc Baton Rouge, LA

    ReplyDelete
  36. I HAVE DVELOP 452 AND I HAVE PROBLEMS WITH THE CODE C2556 ONLY WITH THICK1 PAPER. THE MACHINE PRINTS 6 COPIES AND THEN THE CODE C2556 COMES. IF I USE PLAIN PAPER OR THICK 2 WORKS FINE!

    ReplyDelete
  37. bJr
    Quelqu'un pourrait m'indiquer comment reinitiliser l'unite d'imagerie Magiclor MF 4690 ?
    Cordialement

    ReplyDelete
  38. sombody could answer me if it's possible to reset a 4690 MF Konica Minolta Transfer Belt cause ther is not fuse

    ReplyDelete
  39. Hi there, I have a Bizhub C250 but it has exactly the same set up as the pictures shown on here. I am trying to reset the Transfer Belt and have replaced it with a 63ma and nothing stil this same them change for 32ma and reset it.
    But i have problem with copies when i try do a copy still have error code C-2451. Can anyone help please? my email masal@poczta.fm

    ReplyDelete