You can suport my work by donations.

Thursday, August 19, 2010

Bizhub 164/184 service manual

Bizhub 164/184
Parts manual, service manual, theory of operation. Everyting in one archive.

bizhub_164_184.zip

18 comments:

  1. service call c2558 error

    ReplyDelete
    Replies
    1. Hi,
      I had the same problem with you C2558 and it took me almost i year looking for the solution to this error until just two days ago I was able to fix it. This is how: change the developer powder together with the OPC drum. Be sure to discard old developer powder as well as the toner in the toner collector just above the drum. Upon filling with new developer, don't install the toner bottle yet. Go to service choice, then auto adjust the TCR gain. Then, clear the data for supplies. Afterwards, install the toner bottle then auto panel reset the machine and test a copy. Good luck!

      Delete
    2. nai kaam dela ade henta eka lekhuche

      Delete
  2. http://rapidshare.com/files/413949845/bizhub_164_184.zip

    ReplyDelete
  3. mouse was cut tray sensor wire and registration roller sensor wire of machine bizhub 164 . how to connect wire. pls give me solution

    ReplyDelete
  4. Anonymous, Mar 14, 2011 03:48 PM: Thanks a lot!

    ReplyDelete
  5. konica minolta bizhub 164 error c2558

    ReplyDelete
  6. Maintenance call (M2) how to clear this alaram

    ReplyDelete
  7. hey i have konica minolta bizhub 164 using it for over almost two year the only problem is that i have change the toner in may 2012 everything was working fine but now from past 3 to 4 days if that the paper is not printing well, i had spoke to a person from where i purchased my toner and the machine as well, he told me to clean the dust from the drum so anyone can help me would be grateful and i wanna service my machine, please contact me below

    Jackson D'souza
    +919833556132
    dj_jack97@yahoo.com

    ReplyDelete
  8. error cde cc102 in konica minolta bizhub164

    ReplyDelete
  9. bizhub 164 error MAINTENANCE CALL (M2)
    CALL SERVICE
    How the Drum should be replaced...! help

    ReplyDelete
  10. I want software konica minolta bizhub 184 reset service counter and explain for me this product please help me.

    ReplyDelete
  11. bizhub 164 error MAINTENANCE CALL (M2)
    CALL SERVICE
    How the Drum should be replaced...! help

    ReplyDelete
  12. bizhub 164 error MAINTENANCE CALL (M1) error. Please give some tips to clear the error... sakthivengatasan2006@yahoo.com and Gmail.com also

    ReplyDelete
  13. This comment has been removed by the author.

    ReplyDelete
  14. bizhub 164 error MAINTENANCE CALL (3451) error. Please give some tips to clear the error... musthafapb@gmail.com and yahoo.com also

    ReplyDelete